— ALL TOOL SCHOOL, Sewing/Quilting, Tool School Extra Credit —

Extra Credit: Pillow Slipcover By the Shibaguyz

December 26, 2020

Pillow Slipcover

By the Shibaguyz

It’s inevitable, especially at this time of the year when we are spending so much of our time inside with our possessions. You start to notice all the small things: The pulled threads, the small stains, that slightly worn edge on the sofa pillow. Or maybe you are just really tired of looking at the same elephant staring at you from the pillow print. New Years is just around the corner, it’s time for an easy makeover. We suggest the humble Pillow Slipcover.

The pillow is in good shape, no need for a new one… but you just need something brighter and cheery for a while? Let’s cover that pillow with an easy slipcover. All you need is one piece of fabric wide enough to cover and long enough to wrap around the pillow. That and a few tools from Clover and you are well on your way to a whole new decorating scheme.

What an easy way to re-decorate a room for any holiday or change in season!

NOTIONS AND TOOLS

MATERIALS

Fabric

For this project we will be using a single piece of fabric folded and sew for the pillow slipcover. You will need to use the following worksheet to figure the amount of fabric needed for your pillow. Using this easy formula, you can cover ANY square or rectangular pillow regardless of size.

Pillow Measurement Worksheet:

Pillow Width in inches (A) ____________

Pillow Height in inches (B) ____________

2/3 of B in inches (C) ___________

Fabric Cuts Formula

Width: A + 1″

Length: (C x 2) + B

Here is an example using a square pillow 12″ x 12″

Pillow Width in inches (A) = 12″

Pillow Height in inches (B) = 12″

2/3 of B in inches (C) = 8″   *if B = 12″ then C is 8″. (2/3 of 12 = 8)

So, the cut width is A + 1 = 13″

The Length of our fabric cut is: (C x 2) + B.

Plugging in the numbers we get, (8 x 2) + 12 = 28″

Meaning we need a rectangle of fabric 13″ x 28” for this sample. Easy!

INSTRUCTIONS

Step 1: Measure Your Pillow

Measure the height and width of the pillow.

Step 2: Plug in your numbers to the worksheet

  • Plug in your numbers to the worksheet.
  • Grab your calculator…
  • Decide on what FAB fabric to use. Anything goes here. We’re using a piece of batik that we have been saving for “something.”

Step 3: Cut your Fabric

Cut your fabric to the dimensions needed.

Step 4: Iron and Sew the Short Ends

  • With the Right side facing you, use the Hot Ruler to fold the short ends down 1/2″.
  • Press fabric flat with iron.
  • Sew down to secure.

Step 5: Fold the Ends in

  • With the Right side facing you, use the measurement C from the worksheet and measure in from each end that amount
  • Use a Hera Marker or Tailor’s Chalk to mark the fold line.

Step 6: Sew the Sides

  • With Right side facing up, fold the ends over each other and secure the unsewn ends with Wonder Clips.
  • Sew closed using a 1/2″ seam allowance.

Step 7: Turn and Insert the Pillow

  • Turn the slipcover right side out.
  • Insert your pillow
  • Decorate the whole house with newly covered pillows. You have our permission!

DONE!